HORIZONTAL CURB CUTTING PREPARATION

 

  • The Prep Work
  • New Driveway Approach
  • Driveway Widening
  • The Cut
  • Ready To Pour

The choice is yours, Garrett can do it all, from preparation to completion or you can prepare it before we arrive.

 

Our equipment cuts from the back of the curb. In order for us to perform the Curb Cut, we need an area cleared of 4 feet from the back of the curb and 12 inches below the top of the curb. Curb Cutting Prep

The integrity of the original membrane surface and joints of the curb, gutter and street remain intact and structurally sound and complete as when the job began.

In order for us to perform the Curb Cut, we need an area cleared of 4 feet

from the back of the curb and 12 inches below the top of the curb.

 

New driveway approach curb cut

A new driveway approach, prepped and ready to be cut.

 

The integrity of the original membrane surface and joints of the curb, gutter and street remain intact and structurally sound and complete as when the job began.

When widening an exiting driveway approach, the wing or flare

must be removed to allow for a proper curb cut.

 

Driveway approach curb cut

An existing driveway approach, prepped and ready to be cut.

When widening an exiting driveway approach, the cut will

angel.

 

Curb Cutting

Cutting existing driveway approach.

The finished ramp and adjoining street surface is not compromised.

 

Curb Cutting

A new approach cut, ready to be formed and poured.